SUNFLOW TECHNOLOGIES

• Make: Sunflow
• Model: SF/TLI/406
• Measuring Range: 250 mm, can be customized
• Medium Density: 0.5 kg/L
• Medium Pressure: 5.0 Mpa

Additional Information:

• Item Code: SF.SMLI.406
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 25 NOS.
• Delivery Time: 3-4 WEEKS

Sunflow” make Mc-leod gauges measures vacuume Pressure

Model No : SF/MG/300 Portable Mc-leod gauge, with stand 1 st fill Mercury.
The vacustate suitable for measurement of vacuum in the range : 10 mm. to 10-3mm of Hg. (i.e. 10 mm. to 0.001 torr) with stand 1 st Mercury. This gauge avoids use of a movable reservoir of mercury and also requires only about 14 cc. of mercury for first filling. The total size of this gauge is about 9” x 6”. Metallic stand with Rotating arrangement 1 st fill mercury is provided.

WORKING OF THE GAUGES : The system of which vacuum is to be measured, is connected by flexible rubber tubing to nozzle on the back centre of gauge at A. Gauge is in Horizontal position-1 initially. To take vacuum reading, gauge is to be rotated in the vertical position-2. Mercury runs out of the container B, compressing the residual air or gas. contained within region C D, to short length of capillary tube C E. By arranging that the level in the comparison capillary F is opposite the end of the graduated capillary C E, slight adjustment of gauge above the vertical axis is needed to adjust the mercury level correctly. the Reading in tube C-E is absolute Vacuum in mm of Hg in your line.
Gauge is portable so one gauge can be used to counter check absolute vacuum at different places. Very help full to know that permanently mounted Dial Type Pressure gauge or U-Tube high vacuum manometer or any other gauge is giving correct reading or needs maintenance re-calibration. scale is expanded from 1.0 to .001 toor and so minute reading in very last stages becomes passable.
Other vacuum measuring manometer available with us are : a) U-Tube Absolute High vacuum manometer with Attached Catchpot, measure vacuum in last stages from 660 mm to 760 mm Hg., in stapes of 1mm Hg. b) Full range vacuum manometer, one end open to atmosphere range 0 to 760 mm Hg. c) Condenser Vacuum gauge with Attached Catchpot. Lighting arrangement is optional

Additional Information:

• Item Code: SFMG300
• Port of Dispatch: MUMBAI
• Production Capacity: 100 Nos
• Delivery Time: 1-2 Weeks

• Chemical resistance
• Low maintenance
• Easy in operation

Applications:

• Corrosive acids - oleum, H2SO4
• HNO3, Acetic
• Solvents - benzene , toluene, alcohols, CS2.
• Liq. Gases - LPG, NH3, Chlorine
• Propylene, Butadiene.
• Veg. Oils, Fuel Oils, Lubricants, Water
• Poisonous / toxic liquids, DMA, TEA, PCL3, SO3

Additional Information:

• Item Code: SF.SMMLI.406
• Production Capacity: 50 NOS
• Delivery Time: 2 WEEKS

MAKE SUNFLOW MODEL SF/SMLS/407
Technical Specification Flameproof Side Mounted Level Switch

Features

• Model (SMLS-407-FLP)
• Process Connection 82mm Sq.flange with 4 nos. bolt holes of 10mm
• Dia on 82mm PCD.
• Material of Construction All wetted parts SS 316
• Float 50mm Dia x 85mm long - SS316L
• Type of Switch 1 No. Change over Reed Switch.
• Switch Rating 60VA.
• Maximum Switching Voltage 230VAC
• Maximum Working Temperture 150^o C
• MaxiMum Working Pressure 10 kg/cm
• Differential between make break 10mm, (+-2mm)
• Specific gravity Down to 0.75
• Enclosure Flameproof Having CMRI CCOE Certificate
• Cable Entry 1/2"NPT(F)

• Make SUNFLOW
• Model SF/SMMLS/407
• Wetted Part SS304, SS316, PP, PVC, PTFE Coating
• Process Connection Flanged / Screwed
• Enclosure Weatherproof / Flameproof
• Switch Micro Switch rating 5 Amps. , 230VAC
• Contact NO/NC (Potential Free)
• Temperature 500C max.
• Pressure 20 kg/cm max.
• Application water, oil, chemical, solvent etc

• High / Low-Level Alarm
• Automatic Pump Control
• Safety Inter-Locks Circuits
• Solenoid Valve Control.
• Prevention of Tank overflows
• Pump safeguard against dry running

Additional Information:

• Item Code: SF.SMSL.407
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100 NOS.
• Delivery Time: 1-2 WEEKS

• Optimum quality
• Compact design
• Sturdiness

Additional Information:

• Port of Dispatch: MUMBAI
• Production Capacity: 50 NOS.
• Delivery Time: 4-6 Weeks

• Operation without power supply
• Reed switches separated from process
• Wetted parts stainless steel or plastic
• Up to 5 switch points
• Various process connections
• Explosion-proof models

• Liquids with min. 0.7 kg/dm3 density
• Multi-point level switch in closed tanks
• Chemicals with dense vapor or gas layer above the surface
• Foaming liquids

• Switch Rating: 250 V AC, 3A / reed relay, max. 9A
• Ambient Temperature: -20 °C to 95°C
• Medium Temperature: -20 °C to 150°C
• Pressure: max. 25 bar
• Process connection: 1", 2" or flanges
• Protection: IP 65
• Approvals: II 2 G EEx d IIC T3...T6 (TÃœV)

Additional Information:

• Item Code: SFTMMLS412
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 50-100 nos.
• Delivery Time: 2 Weeks

• It consists a magnetic float and a guide stem. A chain of reed switches and resistors are placed inside the guide stem. As per liquid level float moves up or down on the stem, magnet inside the float operates the reed switches inside the stem thereby causing a change in resistance value. Change in the resistance is measured by the electronics unit located in the enclosure and conditioned as a current output of 4 to 20 ma.

• Measuring range min. 200 mm to max. 3000 mm
• Output 4-20 ma dc, 2 wire
• Supply voltage 24 vdc
• Enclosure die cast aluminium, weather proof/flame proof
• Moc of wetted part (float & stem) ss304/ss316/pp
• Process connection 2"/3" flanged/threaded
• Moulting vertically ( top of the tank)
• Process temperature 100 Degreec max.
• Process pressure 10 kg/cm

• Continuous level monitoring in the storage tank of liquids like water, diesel , oil, fuel, acids, chemical, solvent, milk, juice etc.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 25
• Delivery Time: 2-3 WEEKS

• No Power Consumption . Will not be affected by power failure
• A level transmitter or magnetic switch can be installed and adjusted without disturbing the process
• 360 degree magnetic-flux field provides constant interaction with roller assembly in turbulent liquids
• Roller channel and outer housing is of black powder coated aluminium. Outer housing in stainless steel as optional
• Rollers are of glass filled Nylon/ABS plastic
• Rollers move on Delrin bush bearings. Delrin is a self lubricating type material and hence movement will be frictionless, thus ensuring long life
• Front window is of crystal clear acrylic
• Acrylic windows has a U-gasket i.e. double gasket-gasket on top & bottom side ensuring perfect sealing on both side
• Compact, rugged and field proven
• In our level gauges the primary magnet attached to float is 360 degree rare earth. Rare Earth magnet has an unusually high energy output and is highly resistant to demagnetization, they will not demagnetize at high temperatures like ceramic magnets

• Applicable in environment with high temp., high pressure, strong acid, strong alkaline and hazardous locations
• Multiple applications for textile dyeing, sewage water processing, power generating, boiler and petrochemical industries

• Follower Glass Tube Borosilicate
• Indicator Red Coloured Float (Magnet encapsulated)
• Glass Tube Protection Aluminium Channel / Aluminium Pipe

• Bicolour Indicator Red on one half & White on other half
• Roller pivot Delrin Bush
• Roller Magnet Housing Powder Coated Aluminium Channel/Stainless Steel 304
• Window material Crystal Clear Acrylic
• Scale Black Powder Coated Aluminium/Acrylic/stailess Steel 304, engraved Markings & numerals
• Process Connection 3/4" ASA 150 Lbs flanged as Standard. Other connections as per customers' specification
• Mounting Side/Top Mounted
• Center to Center Distance between flanges: 500, 1000,1500 mm Or as per request. (Max. 3000 mm)
• For Top mounting. Please specify tank height
• No of Electric Contacts High, Low or Both High and Low
• Type of Contacts Adjustable externally throughout the range
• Operating Temperature
• Please Specify
• Operating Pressure
• Please Specify
• Specific Gravity of the Fluid
• Please Specify

• Temperature: ≤ 300°C
• Visible distance: 100 mm to  6000 mm, Power supply voltage: AC 220V (with adapter) or DC24V

• Minimum Order Quantity: 1 Ounce

Float and Board Type Level Indicator:

Model No.: SF/FBTLI/403
Suitable for measurement of liquid level in over ground/over head storage tanks.
Utilise: Suitable for reacting liquids like HCL, HNO3, NH4OH and other liquid were absolute vapour tightness is required.
Float C.S./S.S..304/S.S.316/PP/PVC/Teflon lined Housing Alluminium / PP etc..
Wire housing C.S./S.S..304/S.S.316/PP/PVC/Teflon Nylon

• Probe length /measuring range: 0.25 to 3 meters (rigid/rod) 1 to 20 meters(flexible/rope)
• Probe material: stainless steel rod /rope (insulated partly or fully with PTFE )
• Medium temp: -20 deg c to 100 dec c special version up to 200 deg c
• Electronics: -25° c to +65° c
• Output: 4-20 m a dc ( 2 wire loop power)
• Supply voltage: 12-30 v dc
• Mounting connection: 1/2" standard for rod probe, others as per request and application.
• Conductive material: water based solutions. Acids, bases etc – only insulated probe are suggested.
• Non-conductive material: mostly petrochemical and solvents – insulated or noninsulated probes can be used.

• Continuous level monitoring, level measurement , sensing and control in tanks of liquids like acids, acetone, ammonia, benzene, water, chemicals solvents ,ctc, diesel, oils, fruit juice, milk, wine etc , and in hoppers/vessels of solids like cement , fly ash, coke, corn, quartz, food grains, sand , powdery and granules.

• Durable finish standards
• Unmatched quality
• Flawlessly finished

• Switch Rating: 250V AC, 15 A
• Temperature: 0 °C to 80 °C
• Pressure: max. 2 bar
• Protection: IP 68

Additional Information:

• Port of Dispatch: MUMBAI
• Production Capacity: 500
• Delivery Time: 1-2 WEEKS

Max Temp : 70°C

Max Pressure : Atm

Wtd Parts : SS304 / SS316

O/P : 4-20 mA 2 wire

Enclosure : on request

Water, Non- corrosive liquids, Fuel oil, Diesel in tanks and Marines

• Probe length /measuring range: 0.25 to 3 meters (rigid/rod) 1 to 20 meters(flexible/rope)
• Probe material: stainless steel rod /rope (insulated partly or fully with PTFE )
• Medium temp: -20 deg c to 100 dec c special version up to 200 deg c
• Electronics: -25° c to +65° c
• Output: 4-20 m a dc ( 2 wire loop power)
• Supply voltage: 12-30 v dc
• Mounting connection: 1/2" standard for rod probe, others as per request and application.
• Conductive material: water based solutions. Acids, bases etc – only insulated probe are suggested.
• Non-conductive material: mostly petrochemical and solvents – insulated or noninsulated probes can be used.

• Continuous level monitoring, level measurement , sensing and control in tanks of liquids like acids, acetone, ammonia, benzene, water, chemicals solvents ,ctc, diesel, oils, fruit juice, milk, wine etc , and in hoppers/vessels of solids like cement , fly ash, coke, corn, quartz, food grains, sand , powdery and granules.

Tabular Level Indicator

Model No. SF/TLI/409 MAKE SUNFLOW

Construction & Operation Level Gauge is fitted between two end blocks through gland packings. The gauge is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of tie-rods / c-channels around the gauge to protect it from accidental blows. End blocks have built-in isolating valve, drain valve&vent plug.

Features

360 Degree visibility with tie-rod guards. Glass removal / replacement possible w/o dismantling of gauge. Offset isolating valves permit cleaning of glass gauge w/o removal.

Special Features (Optional)

Standard Specifications

Additional Information:

• Item Code: SFTLI409
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 200 nos
• Delivery Time: 2-3 Weeks

• Durable finish standards
• Corrosion resistance
• Flawlessly finished

• Liquid chamber: C.S./S.S..304/S.S.316
• Cover plate: C.S/M/S/
• End fittings: CS/S.S.304/S.S.316
• Valve body: S.S. 304/ S.S.316
• Press rating: 75 kg/cm
• Temp: 300° C
• Range: 0-3 metre.
• Make: Sunflow
• Model: SF/RLG/305

• Material of construction: SS 316.Float diameter-28 mm
• Process connection: 1/4" BSP(M) thread with locknut
• PTFE Teflon gasket
• Mounting Hole diameter:13 mm
• SPST Reed switch rated 100VA, maximum switching voltage-230 VAC/300 VDC, maximum switching current-1 Amp.With 1 Metre long 19/36 SWG Teflon insulated flying extension leads
• Maximum working pressure: 4 kg/sq.cm &Temperature-125 deg C.Specific gravity-0.5

Additional Information:

• Port of Dispatch: MUMBAI
• Production Capacity: 500 NOS
• Delivery Time: 2-3 WEEKS

• 3/4 ET for power Cable
• 3/4 ET for Output Signal Cable
• 5/8 ET for connection of Coaxial Cable

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 50
• Delivery Time: 2 WEEKS

• Output: 0-5 Volts, 0-10 Volts - 3 Wire System.
• Optional: 4 to 20 mA Output ( as a separate unit).
• Power Requirements: 8 to 24 VDC for 5V Output / 12 to 24 VDC for 10 V Output (Maximum Current = 30 mA)
• Operating Temperature: 4 to +85 C (-40 to 185 F)

Reflex Level Gauge:

Model No.: SF/RLG/405

Technical Specification Reflux Level Gauge

Make :Sunflow

Model : SF/RLG/405

01 CC Distance : To Specify

02 Visibility Distance :Below in

03 Process Connection :To Specify

04 Gauge Chamber /Trim :A105/ANSI SS 316

40 MMx40 MM Squire Pata

05 Cover Plate : A105/ANSI 316

06 Isolation Valve : Auto Shut Valve

07 Drain : ¾ NPT Needle Valve

08 Vent : ¾ NPT Plug

09 Measuring Tube :Pyrex Borosilicate

Din 7080/70801

10 Fastener ; A193 B7

11 Packing :Chemical Proof (Mica)

12 U Bolt : A105

13 Hydro Test : 40 Kg/Cm2

14 Moc :SS 316/A105

15 Illumunitor :25W. 230 V AC ATEXT3

16 Appilication :Solvent

17 Pressure : 40 kg/cm2 Max

18 Temp : 300 Deg -400 Deg Max

19 Protection :IP-65

• 2- or 4-wire FMCW technology
• TBF mode for low Er
• Field indicator facility
• High accuracy up to ± 1 mm
• High pressure
• High-temperature range
• Low dead band
• Explosion-proof models

• Level or volume measurement
• Liquids, powders, granules with Er > 1.5
• Medium with dust, vapor or pressurized gas layers above the
• product surface
• Heavy industrial applications

• Power supply: 24 V DC, 24 V AC, 100-120 V AC, 220-240 V AC
• Flange Temperature: -60… 250 °C
• Pressure Max: 0….64 bar
• Measuring range: up to 40 m (100 m)
• Analog Output: 4 - 20 mA, HART
• Communication: HART, Profibus PA, FF, Modbus (RS485)
• Protection: IP 66/67
• ATEX Approval: II 1/2 G EEx de IIC T6...T1
• II 2 G EEx de IIC T6...T1
• II 1/2 G EEx de [ia] IIC T6...T1
• II (1)2 G EEx de [ia] IIC T6...T1
• II 1/2 G EEx in IIC T6

• Housing: Die Cast Aluminum, weather proof, powder coated, Integral with the probe
• Cable entry: 2 nos.
• Ambient temperature: 0 ° C to +60° C
• Power consumption: 2 VA
• Mains Voltage: 230/110 V AC (+/-15%), 50 Hz OR18-55 V DC or 65-265 VAC
• Output: 2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads
• Switching delay: Continuously adjustable From 1 to 20 sec. probe Free or probe covered (Optional)
• Safety operation: Field selected switch over for min. or max. (FSL/FSH) switching points
• Switch status display: Green LED shows Normal, Red LED shows alarm
• Fork (Sensing Probe):
• Mounting: Screwed ¿ 1 ½ BSP (standard) Or Flanged (optional)
• Sensing Fork: Stainless steel SS304/SS316
• Extension: Pipe
• Probe Insertion Length: 250 mm standard, Extension up to 3000 mm
• Operating Temperature: 150 deg (standard), up to 200°C (on request)

• Vibration of the fork has self cleaning properties
• The light deposit on the container wall does not affect the operation
• Fast and Easy Installation
• No Calibration
• No effect of electrical properties of the Service material
• High Reliability
• Suitable for the highly dusty environment
• Field selectable operation logic
• Can be configured either for High or Low Level point switching
• Provides economical solutions

• SUNFLOW Vibrating Fork Level Switches series VFLS are the most suitable for level detection of Free Flowing Solids across wide density range from fine powders and polymers to granules and grains up to the particle size of Ø12 mm. These are mounted from Side- Horizontally or Top-Vertically in bins, vessels silos and hoppers of application material. It can be used for level sensing & control , blockage detection, high level /overfill and low level protection

• Plastics, Powders, Flour, Cement, Coal Powder, Fly ash , Lime Powder, Bulk Solids Handling, Chemical, Pharmaceutical, Food, Paper, and many others in the form of solid powdery, granules