SUNFLOW TECHNOLOGIES

Sunflow” make Mc-leod gauges measures vacuume Pressure

Model No : SF/MG/300 Portable Mc-leod gauge, with stand 1 st fill Mercury.
The vacustate suitable for measurement of vacuum in the range : 10 mm. to 10-3mm of Hg. (i.e. 10 mm. to 0.001 torr) with stand 1 st Mercury. This gauge avoids use of a movable reservoir of mercury and also requires only about 14 cc. of mercury for first filling. The total size of this gauge is about 9” x 6”. Metallic stand with Rotating arrangement 1 st fill mercury is provided.

WORKING OF THE GAUGES : The system of which vacuum is to be measured, is connected by flexible rubber tubing to nozzle on the back centre of gauge at A. Gauge is in Horizontal position-1 initially. To take vacuum reading, gauge is to be rotated in the vertical position-2. Mercury runs out of the container B, compressing the residual air or gas. contained within region C D, to short length of capillary tube C E. By arranging that the level in the comparison capillary F is opposite the end of the graduated capillary C E, slight adjustment of gauge above the vertical axis is needed to adjust the mercury level correctly. the Reading in tube C-E is absolute Vacuum in mm of Hg in your line.
Gauge is portable so one gauge can be used to counter check absolute vacuum at different places. Very help full to know that permanently mounted Dial Type Pressure gauge or U-Tube high vacuum manometer or any other gauge is giving correct reading or needs maintenance re-calibration. scale is expanded from 1.0 to .001 toor and so minute reading in very last stages becomes passable.
Other vacuum measuring manometer available with us are : a) U-Tube Absolute High vacuum manometer with Attached Catchpot, measure vacuum in last stages from 660 mm to 760 mm Hg., in stapes of 1mm Hg. b) Full range vacuum manometer, one end open to atmosphere range 0 to 760 mm Hg. c) Condenser Vacuum gauge with Attached Catchpot. Lighting arrangement is optional

Additional Information:

• Item Code: SFMG300
• Port of Dispatch: MUMBAI
• Production Capacity: 100 Nos
• Delivery Time: 1-2 Weeks

Additional Information:

• Item Code: SF.PG.308
• Production Capacity: 250 nos
• Delivery Time: 2 WEEKS
• Packaging Details: A carton is a box or container usually made of liquid packaging board, paperboard and sometimes of corrugated fiberboard. Many types of cartons are used in packaging. Sometimes a carton is also called a box.

Pressure Transmitter
supply& distributor  :danfoss , honeywell, abb, fuji, keller ,aplisen, Switzer instruments, baumer , wika  MSI etc

Specifications: 

• Accuracy: ± 0.05 to0.025% of full scale
• Range: UP to 1000bar
• Power supply: 8 to 30 volts DC
• Output signal: 4-20 mA, 2 wires
• EMC compatibility: 80 MHz – 1 GHz
• Operating temperature: -40 to 105ºC
• Electrical connection: M12 & Mini DIN Connectors, plastic
• Material of wetted parts: 316SS
• Process connections: ¼" NPT Male

Additional Information:

• Production Capacity: 500 NOS
• Delivery Time: 1-2 WEEKS OR STOCK

The SERIES 476A Single Pressure Digital Manometer can be used to measure low pressures from -20 to 20 in w.c. with ±1.5% FS accuracy. The SERIES 478A Differential Pressure Digital Manometer can be used to measure positive, negative, or differential pressures. Both units are constructed of an extruded aluminum case for exceptional durability.

• Verify field instrumentation performance
• Adjust fuel mixture on combustion systems

• One button auto-zero function
• Auto power off function to conserve battery life
• Rugged extruded aluminum housing
• Instant selection of up to nine English/metric units
• ±0.5% FS accuracy

sunflow solid acrylic body portable manometers are fabricated from a link. Thick acrylic plastic solid block, vertically unbreakable stable and free of distortion. Pvc plastic engraved scale, zero adjusting knob, level bottom and panel mounting holes provide with a manometer.

specifications:

• standard ranges available in 5 mm wg to 150 mm wg/ wc
• fluid: red gauge oil sp. Gr 0. 823 & 0. 810
• resolution: 0. 1 /0. 2 /0. 5 mm w. C.
• measuring unit: mm wc pascal m bar

Additional Information:

• Item Code: SF.ABITM.307
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 200 NOS
• Delivery Time: 2-3 WEEKS

SunFlow Manufacturing Products - Acrylic Body U-Tube Manometer

Model No. SF/ABUTM/303

Sun Flow solid acrylic body portable manometers are fabricated from 1".Thick acrylic plastic solid block, virtually unbreakable stable and free from distortion. PVC plastic engraved scale, zero adjustment knob level bottle and panel mounting plate are provided with the manometer.

Range in mm. Water Gauge (wg/wc/mmhg)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100 nos
• Delivery Time: 2 weeks

PRESSURE TRANSMITTER

Application: Liquid ,Gas & Vapor .

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 1000
• Delivery Time: 1-2 weeks
• Packaging Details: Cartoon Box

SunFlow Manufacturing Products - Acrylic Body Single Limb Direct Reading Manometer
Model No. SF/ABSLM/302

Sun Flow Solid Acrylic body Manometers are fabricated from 1 inch. Thick acrylic plastic solid block, virtually unbreakable stable and free of distortion. PVC plastic engraved scale, zero adjusting knobs, and panel mounting holes provided with manometer.

Range in mm. Water Gauge.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100 NOS
• Delivery Time: 2 WEEKS

INDUSTRIAL PRESSURE GAUGES

MODEL :SF/PG/308
Diaphragm Sealed gauges recommended for protection from corrosive or viscous fluids, clogging, and in-line freezing of the process media. Accuracy ±1.6% of FSD. Standard
dial size available are 63mm, 100mm and 150mm
. Pressure range from 50 mbar to 600 mbar and 0-1 Kg/cm² upto 0-400 Kg/cm².
Accuracy: ±1% of full scale
LCD Display: 30X 14.5cm, with 4 digits
Range: UP to 210bar
Dimension: Ø3?, H11.5 X W4.5cm
Operating Temperature: -40 to 150°C
Over Pressure: 2* full scale
Process Connections: ¼? NPT Male, standard

sunflow  u tube  manometer are used for precision measurment of pressure, vacuum and differential pressure where certain accuracy is required. Scales are available in inches, mm, kg/cm2, psig, bar, mbar, pa, kpa & mm or inches of water calibrated with mercury / atb liquid with /- 0. 1% accuracy. Calibration traceable to iso - 9000

u-tube manometer sunflow  u-tube type primary standard manometer used for prescision measurement of pressure, vaccum, differential pressure, and flow measurement in plants & labs where certain accuracy is required.

general specification

Additional Information:

• Item Code: SF-IUTM-306
• Production Capacity: 150 NOS
• Delivery Time: 1-2 WEEKS
• Packaging Details: WOODEN BOX OR CARTTON BOX

SunFlow Manufacturing Products - Absolute Manometer:( Use absolute Pressure) Used to measure vacuums at last stage Available with catch pot & isolation valve.

Specifications:

Range In mm Hg Absolute

• 50-0-50
• 100-0-100
• 150-0-150

Additional Information:

• Delivery Time: 2 week s

Additional Information:

• Production Capacity: 100NOS

Additional Information:

• Production Capacity: 100 NOS

Sunflow Make :Differential Pressure Gauge :

Model :SF/DP/300
Specifications
Accuracy : ±1 to 2% ofthe FSD (Ascending)
Migration : Minor from high to low port
Range : 0-0.25 to 0-70 bar or equivalent range in other units
First marking on the scale :20% of the FSD
Sensing element : Piston
Wetted parts :Body material, SS 302 spring, Teflon, & ceramic magnet
Case material :Stainless steel (SS 304)
Dial size in inch /mm :2",2.5",3.5",4",4.5", 6"/50, 63, ao, 100, 115, 150
Mounting : Direct, front flange & 2" pipe mounting
Maximum working pressure :200/400 bar. 200 bar for Alu, Brass & 400 bar for SS body
Maximum process temperature :8o°c /175° F
Body material :Aluminum, Brass, SS 316 & Monel
Seals :Buna-N, Viton & EPDM '0' rings
Window : Float glass(Std.), toughened glass & acrylic on request.
Connection :1/4" NPT(F) Std. optional 1/4" BSP(F)
Porting :In-line, rear, bottom
Over range protection :Up to the max. working pressure from high & low side

Additional Information:

• Item Code: SF-DP-300
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Delivery Time: 3-4 WEEKS

We deal in Siemens, Honeywell, ABB, AUTROL, Emerson RoseMounts, Aplisen Fuji and Mirle Systems – PLC, HMI, Servo Systems, indiaVFD’s on regular basis. We are leading Importer & Supplier for the Honeywell Differential Pressure Transmitter which also includes Honeywell Pressure Transmitter all India etc. We are ranked amongst the renowned organizations that are engaged to provide the best quality range of Honeywell Products. The pressure range varies from 0 bars to 25 bars and has a supply voltage of 9.5 Vdc to 30.0 Vdc.

The offered products are quite popular among the clients in the market. Mentioned are some of the specifications of the offered products:

• Termination Type DIN 43650-C
• Weight 57 g [2.0 oz]
• Full-Scale Span 16 mA
• Operating Temperature -40 ºC to 125 ºC [-40 ºF to 257 ºF]
• Compensated Temp Range -40 ºC to 125 ºC [-40 ºF to 257 ºF]
• Storage Temperature -40 ºC to 125 ºC [-40 ºF to 257 ºF].

Specifications

• Available In wall mounted and stand mounted.
• Range 0-3000 mm WC/HG,
• Color White, Blue

Additional Information:

• Item Code: SF.SLM.305
• Port of Dispatch: MUMBAI
• Production Capacity: 50 NOS
• Delivery Time: 2-3 WEEKS

Additional Information:

• Delivery Time: 4 to 6 Weeks